M
Machinetrail
Home / Kubota / MX5200

Kubota MX5200

52.1 HPDieselTractor
A
Good
Score: 72.7/100
Recalls
153
Found
Known Issues
2
See details
Auction Records
0
No price data
Reliability
A
73/100

Specifications

Documented engine options

These are model and configuration references. Confirm the fitted engine from its identification plate.

Engine Power52.1 HP
Engine (kW)38.9 kW
Fuel TypeDiesel
TransmissionGear, 8 forward / 8 reverse
Drive Type2WD
CategoryTractor
Variants3 found

Safety Recalls

153 found
M6-122, M6-132, M6-142

Agricultural tractor.

Germany
The wheel hubs on the front axle may break, resulting in unsafe driving conditions or the loss of a front wheel, increasing the risk of injuries. The product does not comply with the Regulation on the approval and market surveillance of agricultural and forestry vehicles.
Germany
Radverlust

Die Radnaben an der Vorderachse können brechen, dies kann zu unsicheren Fahrzuständen oder dem Verlust eines Vorderrades führen.

DE
Radverlust

Die Radnaben an der Vorderachse können brechen, dies kann zu unsicheren Fahrzuständen oder dem Verlust eines Vorderrades führen.

DE
Radverlust

Die Radnaben an der Vorderachse können brechen, dies kann zu unsicheren Fahrzuständen oder dem Verlust eines Vorderrades führen.

DE
+148 more recalls
Unlock with full report

Known Issues

2 reported
2 low
Anybody know what this part is called?
low

Trying to order a replacement part for a kubota mx5200 but can’t figure out what it’s called. It’s connected to the stick that controls front end bucket hydraulics. The swivel screw (with the Allen head) broke in half or else I’d just tighten it back down. I drilled out the broken screw but the remaining threaded part of the screw isn’t long enough and keeps slipping back out. Any help would be much appreciated

Hydraulics
What is a reasonable size grader for a Kubota MX5200D?
low

Hey everyone, I've had a 7ft grader delivered today but the salesman said he'd had second thoughts about it and didn't think it would suit my tractor. He ended up taking it back and will look into other options. The main issue he had with it was the weight ~360kg. We do have a very hilly property and the driveway is about 1km long with 100-150m of elevation. The tractor is an MX5200D with water filled rear tires and a loader with bucket on the front. This is the grader (esm21 with the wheel): https://www.cih.com.au/tractor-implements/3-point-linkage-equipment/essential-graders/essential-series-medium-grader/ I definitely appreciate him looking out for me on it but I am a little confused as I've received conflicting advice from others. 1. The same salesman originally recommended it 2. The dealer I purchased the tractor from had offered an 8ft one that was even heavier. The only reason I didn't go with that one was that it was more than twice as expensive 3. Family recommended 'heavier the better' and suggested looking into similar ones I guess I'm just hoping to clarify whether despite his good intentions he might have the wrong info or if he's probably right? Is there a rough guide I can follow to work out what might be suitable?

Hydraulics

Market Value

No auction data available for this model.

Hours Benchmark

Class: Utility (40–100 HP)
Low use300 /year
Typical500 /year
High use750 /year
Typical lifetime10,000 hours
Expected life15 years

Have a specific Kubota MX5200 VIN to check?

Model data shows the average — a VIN/PIN lookup pulls the per-unit history (theft, recalls, prior owners, hours).

Found on the chassis plate or registration papers

Unlock Full Kubota MX5200 Report

Get the complete breakdown: pre-buy checklist, component reliability,153 recalls, 2 known issues, comparable sales, and theft risk analysis.

Full refund within 14 days · Stripe-secured payment

One-time payment · Instant access · Secure checkout